Schedule 40 Pipe Roll Sets for Manual 3-Roll (Large Radius) Bender
These roll sets fit our Manual 3-Roll (Large Radius) Bender for rolling Schedule 40 Pipe. Our "What am I bending?" page (see our Resources tab) is a useful tool if you're not sure what the difference between tube and pipe is.
Please note: This table reflects the maximum recommended wall thicknesses for bending mild steel. For any other types of material, call our tech department at +1 (813) 986-9000 before ordering.
Pro-Tools Manual 3-Roll Bender (Large Radius Bender)
| Nominal Pipe Size (NPS) | Outside Diameter (OD) | Inside Diameter (ID) | Nominal Wall Thickness | Center Line Radius | Shop Die |
| 1/4 Schedule 40 | 0.540" | 0.364" | 0.088" | 3" | ![Schedule 40 Pipe Roll Set for Manual 3-Roll (Large Radius) Bender (NPS 1/4)](https://cdn.shopify.com/s/files/1/0618/1273/files/button-3.png?10081995760132744166") |
| 3/8 Schedule 40 | 0.675" | 0.493" | 0.091" | 3" | |
| 1/2 Schedule 40 | 0.840" | 0.622" | 0.109" | 4-1/2" | |
| 3/4 Schedule 40 | 1.050" | 0.824" | 0.113" | 3" | |
| 1 Schedule 40 | 1.315" | 1.049" | 0.133" | 3-1/2" | |
| 1-1/4 Schedule 40 | 1.660" | 1.380" | 0.140" | 4-1/2" | |
| 1-1/2 Schedule 40 | 1.900" | 1.610" | 0.145" | 7" | |