SB48 Super Bender Tube and Pipe Bender
Round Tube
- Minimum Outside Diameter (OD): 1/4" (6.4 mm)
- Maximum Outside Diamter (OD): 2" (50.8 mm)
- Minimum Wall Thickness: Depends on Die (Contact us for details)
- Maximum Wall Thickness: 0.134"-Solid, Depending on Size (Contact us for details)
Pipe
- Minimum Size: NPS 1/4 (DN 8) Schedule 40
- Maximum Size: NPS 1-1/2 (DN 40) Schedule 40
- Note: Ercolina benders are rated for bending mild steel pipe. For other materials, contact us for details.
Square Tube
- Minimum Size: 1/2" (12.7 mm)
- Maximum Size: 1-1/2" (50.8 mm)
- Minimum Wall Thickness: Depends on Die (Contact us for details)
- Maximum Wall Thickness: 0.125” (3.2 mm)
Other Specifications
- Minimum Centerline Radius (CLR): 2 x OD
- Maximum Centerline Radius (CLR): 8-7/8" (225 mm)
- Maximum Degree of Bend: 180°, after springback
- Bending Speed: 2 RPM
- Programming: NC with Touchpad, 30 programs, 9 bends per program
- Material Positioning Table: Available
- Voltage: 120V, single phase (three phase available)
- This portable 120V powerhouse will bend any angle to 180° in up to 2" tubing or NPS 1-1/2 pipe
- Ideal for fabricators businesses looking to produce consistent quality bends in pipe, tube, squares, solids, and other profiles
- Easy control interface makes it easy for anyone to operate
- Swing-away counterbending die for easy material handling
- Accepts Ercolina's A40-P two-axis positioning table for superior control when performing multiple bends in a part
- Full selection of quick-change tooling for round tubing, sqaure tubing, pipe, and more!
- SB48 Super Bender
- Bending tooling and accessories sold separately
Comes with a 1-year manufacturer's warranty.
Round Tube
- Minimum Outside Diameter (OD): 1/4" (6.4 mm)
- Maximum Outside Diamter (OD): 2" (50.8 mm)
- Minimum Wall Thickness: Depends on Die (Contact us for details)
- Maximum Wall Thickness: 0.134"-Solid, Depending on Size (Contact us for details)
Pipe
- Minimum Size: NPS 1/4 (DN 8) Schedule 40
- Maximum Size: NPS 1-1/2 (DN 40) Schedule 40
- Note: Ercolina benders are rated for bending mild steel pipe. For other materials, contact us for details.
Square Tube
- Minimum Size: 1/2" (12.7 mm)
- Maximum Size: 1-1/2" (50.8 mm)
- Minimum Wall Thickness: Depends on Die (Contact us for details)
- Maximum Wall Thickness: 0.125” (3.2 mm)
Other Specifications
- Minimum Centerline Radius (CLR): 2 x OD
- Maximum Centerline Radius (CLR): 8-7/8" (225 mm)
- Maximum Degree of Bend: 180°, after springback
- Bending Speed: 2 RPM
- Programming: NC with Touchpad, 30 programs, 9 bends per program
- Material Positioning Table: Available
- Voltage: 120V, single phase (three phase available)
- This portable 120V powerhouse will bend any angle to 180° in up to 2" tubing or NPS 1-1/2 pipe
- Ideal for fabricators businesses looking to produce consistent quality bends in pipe, tube, squares, solids, and other profiles
- Easy control interface makes it easy for anyone to operate
- Swing-away counterbending die for easy material handling
- Accepts Ercolina's A40-P two-axis positioning table for superior control when performing multiple bends in a part
- Full selection of quick-change tooling for round tubing, sqaure tubing, pipe, and more!
- SB48 Super Bender
- Bending tooling and accessories sold separately
Comes with a 1-year manufacturer's warranty.