Portabender: Portable Tube and Pipe Bender Package
Round Tube3>
-
Minimum Outside Diameter (OD): 1/2" (12.7 mm)
-
Maximum Outside Diamter (OD): 2" (50.8 mm)
-
Minimum Wall Thickness: Depends on Die (See Die Charts)
-
Maximum Wall Thickness: 0.134"
Pipe
-
Minimum Size: NPS 1/4 (DN 8)
-
Maximum Size: NPS 1-1/2 (DN 35)
-
Note: Our benders are rated for bending mild steel Schedule 40 Pipe. For other materials or Schedules, contact for details.
Square Tube
-
Minimum Size: 1/2" (12.7 mm)
-
Maximum Size: 1-1/2" (38.1 mm)
-
Minimum Wall Thickness: 0.065" (1.7 mm)
-
Maximum Wall Thickness: 0.083” (2.1 mm) - Contact for Larger Wall Thicknesses
Other Specifications
-
Minimum Centerline Radius (CLR): Approx. 3 x OD (See Die Charts for details.)
-
Maximum Centerline Radius (CLR): 7" (177.8 mm)
-
Maximum Degree of Bend: 90 degrees, after springback
- The world's best portable bender-perfect for on-site applications
- No mounting required-store it under your workbench between uses and take it out when you need it
- Bend up to 2", 0.134" tubing or NPS 1-1/2 pipe without air or electric pumps
- Designed, Machined, and Assembled in the USA!
- Bend up to 90 degrees, after springback, without resetting any pins
- Designed for a lifetime of constant use
- Forms quality, repeatable bends (less than 10% distortion in most cases)
- Creates 90-degree bends in less than 2 minutes
- Tooling changes in less than 60 seconds
- All parts are CNC-machined for accuracy
- Full selection of over 300 dies
- Portabender Tube and Pipe Bender
- 1 x Die of your choice
Our Portabender comes with a 1-year warranty against manufacturing defects. For full details on warranty and returns, see our full warranty policy.
Round Tube3>
-
Minimum Outside Diameter (OD): 1/2" (12.7 mm)
-
Maximum Outside Diamter (OD): 2" (50.8 mm)
-
Minimum Wall Thickness: Depends on Die (See Die Charts)
-
Maximum Wall Thickness: 0.134"
Pipe
-
Minimum Size: NPS 1/4 (DN 8)
-
Maximum Size: NPS 1-1/2 (DN 35)
-
Note: Our benders are rated for bending mild steel Schedule 40 Pipe. For other materials or Schedules, contact for details.
Square Tube
-
Minimum Size: 1/2" (12.7 mm)
-
Maximum Size: 1-1/2" (38.1 mm)
-
Minimum Wall Thickness: 0.065" (1.7 mm)
-
Maximum Wall Thickness: 0.083” (2.1 mm) - Contact for Larger Wall Thicknesses
Other Specifications
-
Minimum Centerline Radius (CLR): Approx. 3 x OD (See Die Charts for details.)
-
Maximum Centerline Radius (CLR): 7" (177.8 mm)
-
Maximum Degree of Bend: 90 degrees, after springback
- The world's best portable bender-perfect for on-site applications
- No mounting required-store it under your workbench between uses and take it out when you need it
- Bend up to 2", 0.134" tubing or NPS 1-1/2 pipe without air or electric pumps
- Designed, Machined, and Assembled in the USA!
- Bend up to 90 degrees, after springback, without resetting any pins
- Designed for a lifetime of constant use
- Forms quality, repeatable bends (less than 10% distortion in most cases)
- Creates 90-degree bends in less than 2 minutes
- Tooling changes in less than 60 seconds
- All parts are CNC-machined for accuracy
- Full selection of over 300 dies
- Portabender Tube and Pipe Bender
- 1 x Die of your choice
Our Portabender comes with a 1-year warranty against manufacturing defects. For full details on warranty and returns, see our full warranty policy.