Hydraulic Tube and Pipe Bender 105 Series (Brute)
Round Tube3>
-
Minimum Outside Diameter (OD): 1/2" (12.7 mm)
-
Maximum Outside Diamter (OD): 2-1/2" (63.5 mm)
-
Minimum Wall Thickness: Depends on Die (See Die Charts)
-
Maximum Wall Thickness: 0.134"
Pipe
-
Minimum Size: NPS 1/4 (DN 8)
-
Maximum Size: NPS 2 (DN 50)
-
Note: Our benders are rated for bending mild steel Schedule 40 Pipe. For other materials or Schedules, contact for details.
Square Tube
-
Minimum Size: 1/2" (12.7 mm)
-
Maximum Size: 1-1/2" (38.1 mm)
-
Minimum Wall Thickness: 0.065" (1.7 mm)
-
Maximum Wall Thickness: 0.083” (2.1 mm) - Contact for Larger Wall Thicknesses
Other Specifications
-
Minimum Centerline Radius (CLR): Approx. 3 x OD (See Die Charts for details.)
-
Maximum Centerline Radius (CLR): 7" (177.8 mm)
-
Maximum Degree of Bend: 180 degrees, depending on the die
- Great for custom fabrication applications
- Bend up to 2-1/2", 0.134" tubing or NPS 1-1/2 pipe with no effort!
- 100% Designed, Machined, and Assembled in the USA!
- The world's only true anti-springback system
- Designed for a lifetime of constant use
- Forms quality, repeatable bends (less than 10% distortion in most cases)
- Creates 180-degree bends in less than 2 minutes (requires appropriate die)
- Tooling changes in less than 30 seconds
- All parts are CNC-machined for accuracy
- Industrial-strength 1”-thick arms
- Full selection of over 300 dies
- Brute Tube and Pipe Bender
- Built-in Degree Ring
- 15-Ton American-Made Hydraulic Cylinder
- 10,000 PSI American-Made Air/Hydraulic Pump with Hose
- Stand
- Full Pin Set
- Tensioning Bolt
- 1 x Die of your choice for bending up to 90 degrees (upgrade to 180-degree die by paying the difference in cost)
Our Brute Bender comes with a 1-year warranty against manufacturing defects. For full details on warranty and returns, see our full warranty policy.
Round Tube3>
-
Minimum Outside Diameter (OD): 1/2" (12.7 mm)
-
Maximum Outside Diamter (OD): 2-1/2" (63.5 mm)
-
Minimum Wall Thickness: Depends on Die (See Die Charts)
-
Maximum Wall Thickness: 0.134"
Pipe
-
Minimum Size: NPS 1/4 (DN 8)
-
Maximum Size: NPS 2 (DN 50)
-
Note: Our benders are rated for bending mild steel Schedule 40 Pipe. For other materials or Schedules, contact for details.
Square Tube
-
Minimum Size: 1/2" (12.7 mm)
-
Maximum Size: 1-1/2" (38.1 mm)
-
Minimum Wall Thickness: 0.065" (1.7 mm)
-
Maximum Wall Thickness: 0.083” (2.1 mm) - Contact for Larger Wall Thicknesses
Other Specifications
-
Minimum Centerline Radius (CLR): Approx. 3 x OD (See Die Charts for details.)
-
Maximum Centerline Radius (CLR): 7" (177.8 mm)
-
Maximum Degree of Bend: 180 degrees, depending on the die
- Great for custom fabrication applications
- Bend up to 2-1/2", 0.134" tubing or NPS 1-1/2 pipe with no effort!
- 100% Designed, Machined, and Assembled in the USA!
- The world's only true anti-springback system
- Designed for a lifetime of constant use
- Forms quality, repeatable bends (less than 10% distortion in most cases)
- Creates 180-degree bends in less than 2 minutes (requires appropriate die)
- Tooling changes in less than 30 seconds
- All parts are CNC-machined for accuracy
- Industrial-strength 1”-thick arms
- Full selection of over 300 dies
- Brute Tube and Pipe Bender
- Built-in Degree Ring
- 15-Ton American-Made Hydraulic Cylinder
- 10,000 PSI American-Made Air/Hydraulic Pump with Hose
- Stand
- Full Pin Set
- Tensioning Bolt
- 1 x Die of your choice for bending up to 90 degrees (upgrade to 180-degree die by paying the difference in cost)
Our Brute Bender comes with a 1-year warranty against manufacturing defects. For full details on warranty and returns, see our full warranty policy.